MixByParts

200 ppm for 5 liters

Precise mix & dilution math. Toggle by volume/weight, edit density, copy-to-label.

Exact amounts (pre-calculated)

  • Solute15.72 mL by volume16.7 g
  • Solvent4.984 L by volume4984.3 g

Add 15.72 mL solute, then fill with solvent to 5 L.

How to mix 200 ppm for 5 liters

This calculator preloads a 200 ppm dilution inside a 5 liters container. Confirm the total volume, then follow the product and water amounts surfaced above. Toggle the weight view if you prefer weighing by grams or need density adjustments for thicker concentrates.

  1. Note the exact product and carrier amounts in the "Exact amounts" card. That output updates instantly as you tweak totals or rounding.
  2. Pour the product part first so you can rinse residue with the larger carrier volume.
  3. Top up with water or solvent until you hit the target fill line, then gently invert or stir to homogenize the mix.

Accuracy tips

Need to batch multiple bottles? Duplicate this preset, change the container size, and use the "Copy label" line for fast relabelling. When mixing by weight, enter actual densities so the gram figures hit your process tolerances.

Other containers for 200 ppm
16 oz24 oz32 oz1 gallon250 mL500 mL750 mL1 liter15 liters
Other ratios for 5 liters
1000 ppm500 ppm5000 ppm10000 ppm

How this is calculated

For a ratio of a:b, each part is a/(a+b) and b/(a+b) of the total. PPM mode uses 1 ppm ≈ 1 mg/L for aqueous solutions. Switch to "Mix by weight" to convert those fractions into gram targets using your provided densities.

References & Safety

Keep surfaces visibly wet for at least 1 minute when product labels do not specify a contact time, and always follow local health guidance and product directions.

Last reviewed: 2024-06-01