MixByParts

70% coolant / 30% water in 24 oz

Precise mix and dilution math, with optional density-derived gram targets and copy-to-label tools.

Exact amounts (pre-calculated)

Embed this calculator
  • Coolant16.8 fl oz by volume
  • Water7.2 fl oz by volume

Add 16.8 fl oz Coolant and 7.2 fl oz Water to make 24 fl oz.

How to mix 70% coolant / 30% water in 24 oz

This calculator preloads a 70% coolant / 30% water dilution for a total batch of 24 oz. Confirm the total volume, then follow the component amounts surfaced above. Optional gram targets are derived from these volumes after you enter the exact product densities.

  1. Confirm 70:30 coolant:water by volume and the exact product instructions.
  2. Measure the displayed amounts: 16.8 fl oz Coolant, 7.2 fl oz Water.
  3. Combine only the named components in the order required by the product instructions. Do not add unlisted liquid.

Accuracy tips

Need to batch multiple containers? Duplicate this preset, change the container size, and use the copyable mix line for fast relabelling. Only use gram targets after entering densities from the exact product data.

Other containers for 70% coolant / 30% water
5 liters16 oz32 oz1 gallon250 mL500 mL750 mL1 liter15 liters
Other ratios for 24 oz
30% coolant / 70% water40% coolant / 60% water50/50 coolant mix60% coolant / 40% water

How this is calculated

For a ratio of a:b, each part is a/(a+b) and b/(a+b) of the total. PPM mode uses 1 ppm ≈ 1 mg/L for aqueous solutions. Show gram targets to convert those calculated volumes using the densities you provide; the ratio itself remains volume-based.