70% coolant / 30% water in 500 mL

Precise mix & dilution math. Toggle by volume/weight, edit density, copy-to-label.

MixByPartsCalculator modal

70% coolant / 30% water in 500 mL

Label-ready line

Add 3.876 mL Part A, 496.1 mL Part B; fill to 500 mL.

Mix setup

Volume mixing

ModeMix by

Total batchUnit

Formula inputs

Part APart B

Density A (g/mL)Density B (g/mL)

Finishing touches

Rounding preset

Exact amounts (pre-calculated)

Part A350 mL by volume392.0 g
Part B150 mL by volume150.0 g

Add 350 mL Part A, 150 mL Part B; fill to 500 mL.

How to mix 70% coolant / 30% water in 500 mL

This calculator preloads a 70% coolant / 30% water dilution inside a 500 mL container. Confirm the total volume, then follow the product and water amounts surfaced above. Toggle the weight view if you prefer weighing by grams or need density adjustments for thicker concentrates.

Note the exact product and carrier amounts in the "Exact amounts" card. That output updates instantly as you tweak totals or rounding.
Pour the product part first so you can rinse residue with the larger carrier volume.
Top up with water or solvent until you hit the target fill line, then gently invert or stir to homogenize the mix.

Accuracy tips

Need to batch multiple bottles? Duplicate this preset, change the container size, and use the "Copy label" line for fast relabelling. When mixing by weight, enter actual densities so the gram figures hit your process tolerances.

Other containers for 70% coolant / 30% water

5 liters 16 oz 24 oz 32 oz 1 gallon 250 mL 750 mL 1 liter 15 liters

Other ratios for 500 mL

30% coolant / 70% water 40% coolant / 60% water 50/50 coolant mix 60% coolant / 40% water

How this is calculated

For a ratio of a:b, each part is a/(a+b) and b/(a+b) of the total. PPM mode uses 1 ppm ≈ 1 mg/L for aqueous solutions. Switch to "Mix by weight" to convert those fractions into gram targets using your provided densities.