1:1 in 750 mL

Precise mix & dilution math. Toggle by volume/weight, edit density, copy-to-label.

MixByPartsCalculator modal

1:1 in 750 mL

Label-ready line

Add 5.814 mL Part A, 744.2 mL Part B; fill to 750 mL.

Mix setup

Weight mixing

ModeMix by

Total batchUnit

Formula inputs

Part APart B

Density A (g/mL)Density B (g/mL)

Finishing touches

Rounding preset

Exact amounts (pre-calculated)

Part A375 mL by volume408.8 g
Part B375 mL by volume363.8 g

Add 375 mL Part A, 375 mL Part B; fill to 750 mL.

How to mix 1:1 in 750 mL

This calculator preloads a 1:1 dilution inside a 750 mL container. Confirm the total volume, then follow the product and water amounts surfaced above. Toggle the weight view if you prefer weighing by grams or need density adjustments for thicker concentrates.

Note the exact product and carrier amounts in the "Exact amounts" card. That output updates instantly as you tweak totals or rounding.
Pour the product part first so you can rinse residue with the larger carrier volume.
Top up with water or solvent until you hit the target fill line, then gently invert or stir to homogenize the mix.

Accuracy tips

Need to batch multiple bottles? Duplicate this preset, change the container size, and use the "Copy label" line for fast relabelling. When mixing by weight, enter actual densities so the gram figures hit your process tolerances.

Other containers for 1:1

250 mL 16 oz 24 oz 32 oz 1 gallon 500 mL 1 liter 5 liters 15 liters

Other ratios for 750 mL

2:1 3:1 4:1 5:1

How this is calculated

For a ratio of a:b, each part is a/(a+b) and b/(a+b) of the total. PPM mode uses 1 ppm ≈ 1 mg/L for aqueous solutions. Switch to "Mix by weight" to convert those fractions into gram targets using your provided densities.